VOIDSPAN GROUT & MORTAR PRODUCT SELECTION GUIDE

#200 SERIES PHLc MORTAR BINDER
For most structures with hydraulic lime and low cement/ high lime mortar blends.

#300 SERIES PHLc FINE  POINTING MORTAR
For structures with less than 8mm (5/16”) mortar joint width.

#100 SERIES PHL MORTAR BINDER
For pointing over lime-based bedding mortars, and for use with low strength masonry units and adobe.

#200 SERIES PHLc MORTAR BINDER
For pointing over hydraulic lime and cement-lime bedding mortars, with moderate to high strength masonry units.

#300 SERIES PHLc FINE  POINTING MORTAR
For pointing of joints less than 8 mm (5/16”) wide (butter joints).

#500 SERIES PHLc GRAVITY FEED GROUT
For filling gaps of 10 mm (3/8”) or greater. May be blended with peastone for gaps of 75 mm (3”) or greater.

#600 SERIES PHLc INJECTION GROUT
For filling gaps of 3 mm (1/8”) to 25 mm (1”).

#1100 SERIES “EXTEND” VACUUM SATURATED EXPANDED SHALE AGGREGATE
For filling gaps of 3 mm (1/8”) to 25 mm (1”).

#300 SERIES PHLc FINE  POINTING MORTAR
For filling gaps between 3 mm (1/8”) and 8 mm (5/16”) wide.

#400 SERIES PHLc70 CRACK FILLER
For filling gaps up to 6 mm (1/4”) wide.

#600 SERIES PHLc INJECTION GROUT
For use with grouting ports and VoidSpan Port Anchors

#500 SERIES PHLc GRAVITY FEED GROUT
For filling gaps of 10 mm (3/8”) or greater. May be blended with peastone for gaps of 75 mm (3”) or greater.

#600 SERIES PHLc INJECTION GROUT
For filling gaps of 3 mm (1/8”) to 25 mm (1”). Gaps down to 1 mm (3/64”) require special procedures.

#1100 SERIES “EXTEND” VACUUM SATURATED EXPANDED SHALE AGGREGATE
For filling gaps of 3 mm (1/8”) to 25 mm (1”).

#500 SERIES PHLc GRAVITY FEED GROUT
For bond line widths down to 2 mm (3/32”) when mixed to a paste.

#600 SERIES PHLc INJECTION GROUT
For bond line widths down to 1 mm (3/64”) when mixed to a paste.